WHOLE HOUSE WATERMARK TWIN UNDER SINK TANK WATER FILTER - ULTRAVIOLET SANITATION 3.78L/MIN (1-46WUV)
WATERMARK TWIN UNDERSINK TANK WATER FILTER - ULTRAVIOLET SANITATION 3.78L/MIN (1-46WUV)
Full Australian WaterMark Certification
This Water Filtration System is certified to WaterMark Standards AS/NZS 3497 Under the Certificate number 23247.
WaterMark is the standard that is required by law for a qualified plumber in Australia to install any item on municipal town water. All products used under this certification will give you peace of mind knowing that your water filter complies with Australian plumbing codes.
Our WaterMark filtration systems are hand assembled here in Australia and are batch tested to ensure quality and workmanship for your filtration products.
- GT1-22W - Twin Water Filter System with 1/4" Ports
- GT7-2K - 3.78L/Min UV System 1/4" Ports 14W
- GT2-2NSF - 5 Micron Gradient Polypropylene Spun
- GT4-6P - 1 Micron Coconut Carbon Block
- GT17-0S - Plastic Opening Spanner
- GT14-14S - Inlet Tee Valve
- GT20-16GW - 2 Metres 1/4" Tubing (White)
- GT9-0S - Black Flick Tap Standard Faucet
- GT10-23LS - 1/4" Elbow Fittings
- GT18-13 - 500 kPa WaterMark Certified Pressure Limiting Valve
- Comprehensive Instructions
- 1 x Roll Thread Tape
- Coloured Resale Box
Entry Tee Compliant to NSF/ANSI 61
Gone are the days of struggling to get the right amount of thread tape onto your fittings (such as the feed water block and brass ball valve).
Now, thanks to this handy combination fitting, it's simply a matter of interrupting your cold-water line with this tee and plugging in the 1/4" tubing to the filtration system.
The other benefit of this fitting is that by having the built-in isolation switch you can easily turn the water on and off for cartridge changes.
5 Micron Polypropylene Spun Sediment Filter
Poly Spun is the best type of filtration you can get.
They do not accumulate bacteria as much as other materials, as well as being high flow and low pressure drop.
Effective in all applications.
5 micron is a reasonably fine filtration and would be suited on high quality bore water or town water or infront of RO's.
100% Virgin Polypropylene material - Compatible for Our Watermark Certified Systems
Purefer Polypropylene filters are made using a unique single nozzle manufacturing process, where a single nozzle blows melted polypropylene onto a spinning 5 micron filter core.
As more Polypropylene is blown, the filter diameter gradually widens and the outer density of the filter decreases.
This unique manufacturing process gives Purefer filters a true Gradient Density that allows for a greater dirt holding capacity and higher filtration efficiency compared to standard melt blown filters made from multiple nozzle blowers.
1 Micron 100% Coconut Carbon Filters
This high quality 100% Coconut Carbon filter is the exact filter we use as our front-line carbon filter. As a rule, it is difficult to find 100% coconut carbon filters.
Most lower priced filters on the market are a blend of coconut carbon and coal based carbon. The problem with coal based carbon is that it has a shorter life and often results in a less palatable flavour. We use this 100% coconut carbon filter in all of our pre-assembled kits.
They are top of the range HIGH QUALITY coconut carbon block filters, ideal for taste and odour issues, and perfect for total extraction of town water chemicals.
This particular filter is currently supplied throughout the European market as a premium drinking water filter, and we are in a prime position to offer you this high-quality filter at rock bottom prices, direct from importer to the public.
The perfect carbon block filter is made from 100% Coconut Shell Carbon, which creates what many believe to be sweetest tasting water.
The unique pore structure of this carbon is well suited for chemical absorption, including VOC's, while reducing chlorine and chemicals that contribute to taste and odour.
They are best suited for eliminating taste and odour in tank water supplies, or extraction of chemicals in town water supplies. Carbon filtration is the best form of filtration for chemical extraction due to the longer and more thorough contact time the water has with the carbon, which in turn provides an extremely comprehensive method of chemical removal.
We HIGHLY recommend this method of filtration for chemical taste and odour extraction.
Undersink UV System 14W
UV Water Sanitation is by far the most important filtration process when it comes to rain water treatment. Rain water harbours bacteria of all types but is some cases much more harmful bacteria may be present in the tank.
E-Coli is a common bacterium in tank water and is due mostly to Frogs in and around your tanks/catchment.
Ultraviolet sanitation works by breaking down the cell wall of a micro-organism allowing oxidation to occur which in turn prevents the bacteria from multiplying until it is finally eradicated. Ultraviolet filtration is a chemical free solution to water sanitation creating no by products in the water.
- GT7-2K WaterMark Undersink UV System 14W | 1/4” Ports
- 1 Pair of Plastic Mounting Clamps
- GT7-2K-Lamp 282mm 4 Pin 14W UV Lamp
- GT7-2K-Thimble 331mm Quartz Thimble 23mm*OD
- GT7-8K-PS UL Certified Ballast 10-40W Australian Plug + Earth Cable
- GT7-2NSF-OR NSF/ANSI 42 Compliant O-Rings Suit 23mm*OD
- Commercial Grade Electropolished 304 Stainless Steel Chamber
- Visual & Audible Lamp Failure Alarm
- 1/4” BSP Threaded Female Connections
- Strong Plastic Mounting Clamps – Suitable for Mounting On U/Sink Housings
- High Intensity UV Lamps – Up to 3.8L/min @ 30mJ/cm²
Water Pre-Treatment Specifications
- Hardness < 120 mg/L
- Turbidity < 1.0 NTU
- Iron < 0.3 mg/L
- Manganese < 0.05 mg/L
- Tannins < 0.1 mg/L
- Filtration < 5uM Particulate Filtration